top of page
Bath & Bowl Cleaner - Fresh Linen

Bath & Bowl Cleaner - Fresh Linen

CPAK BATH & BOWL CLEANER is a powerful and effective solution for cleaning bathroom surfaces and tiles. Its specially formulated formula is designed to remove tough stains, soap scum, and hard water deposits, leaving your bathroom fixtures and tiles looking sparkling clean and refreshed. CPAK Bath and Tile Cleaner is ideal for use in bathrooms, showers, tubs, and other tiled areas, making it a must-have for your bathroom cleaning routine.

 

Available Sizes:

  • 1 Gallon
  • 5 Gallon
  • Directions for Use:

    May be used full strength or diluted as much as 1 part to 10 parts water, depending on degree of soil to be cleaned. Apply as a spray or with sponge, thoroughly wet surface to be cleaned. Allow a few minutes contact time but do not allow to dry on surface. Brush or agitate to hasten cleaning if necessary. Rinse thoroughly with water and dry. 

    Wearing gloves will prevent product from drying out hands. Use with adequate ventilation.

  • Precautions

    PRECAUTIONS: Read and understand correct procedures and antidotes as described on the safety data sheet before using product. Container is hazardous when empty. Since empty container retains product residue (vapor or liquid) all labeled hazard precautions MUST BE OBSERVED. Contains Sodium Metasilicate CAS# 6834-92, Glycol Ether, Surfactants.
    FIRST AID & ANTIDOTES: Harmful if swallowed. Avoid contact with skin, clothing and eyes. In case of contact, rinse area immediately with water. Consult physician if irritation persists. For eye contact, immediately flush with water for 15 minutes. Seek medical attention. If swallowed, DO NOT induce vomiting. Take immediately to physician. Could cause permanent eye damage. Burs and damages skin, respiratory and digestive system.
    KEEP OUT OF REACH OF CHILDREN

Bath & Bowl Cleaner - Fresh Linen

CPAK

All Purpose Bathroom Cleaner

CPAK BATH & BOWL CLEANER is a powerful and effective solution for cleaning bathroom surfaces and tiles. Its specially formulated formula is designed to remove tough stains, soap scum, and hard water deposits, leaving your bathroom fixtures and tiles looking sparkling clean and refreshed. CPAK Bath and Tile Cleaner is ideal for use in bathrooms, showers, tubs, and other tiled areas, making it a must-have for your bathroom cleaning routine.

 

Available Sizes:

  • 1 Gallon
  • 5 Gallon

Product Resources

pdf-icon-png-2058.png

Safety Data Sheet Download

pdf-icon-png-2058.png

Spec Sheet Download

Product Information

Directions for Use:

May be used full strength or diluted as much as 1 part to 10 parts water, depending on degree of soil to be cleaned. Apply as a spray or with sponge, thoroughly wet surface to be cleaned. Allow a few minutes contact time but do not allow to dry on surface. Brush or agitate to hasten cleaning if necessary. Rinse thoroughly with water and dry. 

Wearing gloves will prevent product from drying out hands. Use with adequate ventilation.

Precautions

PRECAUTIONS: Read and understand correct procedures and antidotes as described on the safety data sheet before using product. Container is hazardous when empty. Since empty container retains product residue (vapor or liquid) all labeled hazard precautions MUST BE OBSERVED. Contains Sodium Metasilicate CAS# 6834-92, Glycol Ether, Surfactants.
FIRST AID & ANTIDOTES: Harmful if swallowed. Avoid contact with skin, clothing and eyes. In case of contact, rinse area immediately with water. Consult physician if irritation persists. For eye contact, immediately flush with water for 15 minutes. Seek medical attention. If swallowed, DO NOT induce vomiting. Take immediately to physician. Could cause permanent eye damage. Burs and damages skin, respiratory and digestive system.
KEEP OUT OF REACH OF CHILDREN

bottom of page