top of page
Floor Wax 2800

Floor Wax 2800

CPAK FLOOR WAX 2800 is a high-performance metal interlock floor finish designed especially for ultra high speed burnishing systems. CPAK Floor Wax dries to an exceptional gloss with outstanding scuff resistance ad durability. May be applied over water emulsion sealers or used as its own sealer. 
Used as a protective finish for: vinyl, asphalt tile, concrete, sealed wood, rubber, ceramic tile, terrazzo, linoleum. 
 
Available Sizes:
  • 1 Gallon
  • 5 Gallon

  • Directions for Use:

    DIRECTIONS: Remove old finish with CPAK Floor Stripper. Rinse thoroughly and allow to dry. For best results, use only clean mops and pails. Apply a medium even coat of wax. Allow to dry 25 to 30 minutes. Apply second coat after final coat has completely dried. Use the same procedure for additional coats.

    MAINTENANCE:  Dust mop regularly to remove dust and improve wear. Damp mop with a neutral cleaner. High speed buff high traffic areas. Apply additional coats of finish periodically. Use of a mop-on rejuvenator will enhance gloss and extend life of floor finish. 

     

  • Precautions + First Aid:

    WARNING: Read and understand all safety precautions and instructions before using this product. Avoid contact with eyes, skin and clothing. Use in a well ventilated area. Store in a cool, dry place away from sunlight and sources of heat. 

    FIRST AID: FOR EYE CONTACT: flush affected area thoroughly with water for at least 15 minutes. Get medical attention if irritation persists.. FOR SKIN CONTACT: flush with water. Remove contaminated clothing prior to reuse. INGESTION: If swallowed, DO NOT INDUCE VOMITING. Administer several glasses of water and get immediate medical attention. 


    KEEP OUT OF REACH OF CHILDREN
     

Floor Wax 2800

CPAK

​

​

CPAK FLOOR WAX 2800 is a high-performance metal interlock floor finish designed especially for ultra high speed burnishing systems. CPAK Floor Wax dries to an exceptional gloss with outstanding scuff resistance ad durability. May be applied over water emulsion sealers or used as its own sealer. 

Used as a protective finish for: vinyl, asphalt tile, concrete, sealed wood, rubber, ceramic tile, terrazzo, linoleum. 

 

Available Sizes:

  • 1 Gallon
  • 5 Gallon

Product Resources

pdf-icon-png-2058.png

Safety Data Sheet Download

pdf-icon-png-2058.png

Spec Sheet Download

Product Information

Directions for Use:

DIRECTIONS: Remove old finish with CPAK Floor Stripper. Rinse thoroughly and allow to dry. For best results, use only clean mops and pails. Apply a medium even coat of wax. Allow to dry 25 to 30 minutes. Apply second coat after final coat has completely dried. Use the same procedure for additional coats.

MAINTENANCE:  Dust mop regularly to remove dust and improve wear. Damp mop with a neutral cleaner. High speed buff high traffic areas. Apply additional coats of finish periodically. Use of a mop-on rejuvenator will enhance gloss and extend life of floor finish. 

 

Precautions + First Aid:

WARNING: Read and understand all safety precautions and instructions before using this product. Avoid contact with eyes, skin and clothing. Use in a well ventilated area. Store in a cool, dry place away from sunlight and sources of heat. 

FIRST AID: FOR EYE CONTACT: flush affected area thoroughly with water for at least 15 minutes. Get medical attention if irritation persists.. FOR SKIN CONTACT: flush with water. Remove contaminated clothing prior to reuse. INGESTION: If swallowed, DO NOT INDUCE VOMITING. Administer several glasses of water and get immediate medical attention. 


KEEP OUT OF REACH OF CHILDREN
 

bottom of page