top of page
Spectrum 2200

Spectrum 2200

SPECTRUM 2200 is a high-performance metal interlock floor finish designed especially for ultra high speed burnishing systems. Spectrum 2200 dries to an exceptional gloss with outstanding scuff resistance ad durability. May be applied over water emulsion sealers or used as its own sealer. 

 

Used as a protective finish for: vinyl, asphalt tile, concrete, sealed wood, rubber, ceramic tile, terrazzo, linoleum.

 

  • Directions for Use:

    DIRECTIONS: Remove old finish with Floor Stripper. Rinse thoroughly and allow to dry. For best results, use only clean mops and pails. Apply a medium even coat of wax. Allow to dry 25 to 30 minutes. Apply second coat after final coat has completely dried. Use the same procedure for additional coats.
     

  • Warnings + First Aid

    WARNING: Read and understand all safety precautions and instructions before using this product. Avoid contact with eyes, skin and clothing. Use in a well ventilated area. Store in a cool, dry place away from sunlight and sources of heat. 
     

    FIRST AID: FOR EYE CONTACT: flush affected area thoroughly with water for at least 15 minutes. Get medical attention if irritation persists.. FOR SKIN CONTACT: flush with water. Remove contaminated clothing prior to reuse. INGESTION: If swallowed, DO NOT INDUCE VOMITING. Administer several glasses of water and get immediate medical attention. 

     

Spectrum 2200

Power Line

SPECTRUM 2200 is a high-performance metal interlock floor finish designed especially for ultra high speed burnishing systems. Spectrum 2200 dries to an exceptional gloss with outstanding scuff resistance ad durability. May be applied over water emulsion sealers or used as its own sealer. 

 

Used as a protective finish for: vinyl, asphalt tile, concrete, sealed wood, rubber, ceramic tile, terrazzo, linoleum.

 

Product Resources

pdf-icon-png-2058.png

Safety Data Sheet Download

pdf-icon-png-2058.png

Spec Sheet Download

Product Information

Directions for Use:

DIRECTIONS: Remove old finish with Floor Stripper. Rinse thoroughly and allow to dry. For best results, use only clean mops and pails. Apply a medium even coat of wax. Allow to dry 25 to 30 minutes. Apply second coat after final coat has completely dried. Use the same procedure for additional coats.
 

Warnings + First Aid

WARNING: Read and understand all safety precautions and instructions before using this product. Avoid contact with eyes, skin and clothing. Use in a well ventilated area. Store in a cool, dry place away from sunlight and sources of heat. 
 

FIRST AID: FOR EYE CONTACT: flush affected area thoroughly with water for at least 15 minutes. Get medical attention if irritation persists.. FOR SKIN CONTACT: flush with water. Remove contaminated clothing prior to reuse. INGESTION: If swallowed, DO NOT INDUCE VOMITING. Administer several glasses of water and get immediate medical attention. 

 

Contact:

Our Location:

1-800-545-6804

318-255-2952

1923 Industrial Drive

Ruston, LA 71270

Resources:

Chemical Dynamics Inc. 3.png

Subscribe to our newsletter 

Thanks for subscribing!

bottom of page